Samsung AQV09F Series Installation Manual page 3







4
E-
08'FORTE_VIVACE_Inv_IM_28492A£¨4£©_E.indd 4
WARNING
 This indicates the possibility of serious injury or death.
The unit should be installed in
accordance with the National
Electrical regulations.
Ensure that the national safety
code requirements have been
followed for the main supply
circuit. Ensure that a properly
sized and connected ground
wire is in place.
CAUTION
 This indicates the possibility of serious injury or damage to environments when
operated incorrectly.
Check the unit for damage
that may have taken place
during transportation and do
not install or use damaged
equipment.
All of the manufacturing and
packaging material used for
your new appliance are
compatible with the
environment and can be
recycled.
Dispose of the packaging
material in accordance with
the local requirements.
This product is an air
conditioning system and
contains a coolant that must
be recovered and disposed
of in an appropriate way by
qualified personnel. At the
end of the life cycle, take it to
a proper recycling or disposal
center or return it to the
dealer so that it can be
disposed correctly.

Check if the voltage and the
frequency of the main power
supply are those required for
the unit to be installed and
check the connection.
 Make sure that properly sized
disconnecting and safety
switches are installed.

Grounding the unit.
Do not connect the ground
to a gas pipe, water pipe,
lightning rod or telephone
grounding. Defective
grounding could cause
electric shock.
 Do not install the unit in a
place where it is exposed to
inflammable gas leakage.
There is a risk of explosion.
 Install a ground leakage
breaker depending on the
installation place (where it is
humid). If not, it may cause
electric shock.

Perform the drainage/piping
work securely according to
the installation manual.
If not, water could drop from
the unit and household
goods could get wet and
damaged.

Do not attempt to repair,
move, modify or reinstall
the unit on your own. Make
sure that these installations
are carried out by qualified
personnel to avoid electric
shock or fire.
 Use the unit on a single outlet
circuit. Do not share the power
outlet with other appliances.
Obtain the consent by a
qualified installer before
connecting the unit to the
power supply system.

Fasten a flare nut with a
torque wrench as specified
in this installation manual.
When fastened too tight,
a flare nut may break after
a long period of time and
cause refrigerant leakage.
 To prevent injury when
accidentally touching the
indoor unit fan, install the
indoor unit on a place higher
than 2.5m.

The air conditioner must be
installed according to the
national electrical
regulations.
 The maximum input power &
current is measured
according to the IEC standard
and the input power &
current is measured
according to the ISO and
EN14511 standard.
2007-12-6 9:32:16