Transmitter Battery Replacement - Jeep Wrangler 2010 Owner's Manual

Transmitter Battery Replacement

The recommended replacement battery is CR2032.
NOTE: Perchlorate Material – special handling may
apply; See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
1. If the RKE transmitter is equipped with a screw,
remove the screw. With the RKE transmitter buttons
facing down, use a flat blade (screwdriver) to pry the two
halves of the RKE transmitter apart. Use extreme care not
to damage the seal or internal components.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23
Separating RKE Transmitter Halves
2. Remove and replace the battery. Avoid touching the
new battery with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it with
rubbing alcohol.
3. To reassemble the RKE transmitter case, snap the two
halves together.
2