Rear Hard Top Installation - Jeep Wrangler 2010 Owner's Manual

164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
9. To remove the washer hose, pinch the grips on hose
connector and pull.
10. Close the swing gate.
11. Remove the hard top from the vehicle. Place the hard
top on a soft surface to prevent damage.

Rear Hard Top Installation

NOTE: If the door frames are installed from soft top
usage, they must be removed prior to installation of the
hard top.
1. Inspect the hard top seals for damage and replace if
necessary.
2. Install the hard top using the same steps for removal
in reverse order.
Make sure that the hard top is sitting flush with the body
at the sides and check to ensure that there is a uniform
gap between the lift glass and hard top.
NOTE: It is not necessary to pinch connection when
reinstalling washer hose. Push on until click is heard.