Samsung SCD180 Service Manual page 36

12. R-Y NEGATIVE HUE (indoor)
1) Camera mode & 3100˚ K color bar chart
2) Connect a video output terminal to a vec-
torscope and a TV.
3) Press the FF(Mode Up)/REW(Mode Down)
button so that OSD shows "173 XX XX".
4) Ensure that camera picks up image on 3100˚ K
color bar chart precisely and the illumination is
1500-2000 Lux.
5) Press the PLAY (Data Up)/STOP (Data Down)
so that the cyan vector is 280˚ .
6) Press the START/STOP (Confirm) button to
store data.
7) The OSD shows "OK" after finishing the
adjustment.
12-b. R-Y NEGATIVE HUE (outdoor)
1) Camera mode & 5100˚ K color bar chart
(3100°K color bar chart + C16 filter)
2) Connect a video output terminal to a vec-
torscope and a TV.
3) Press the FF(Mode Up)/REW(Mode Down)
button so that OSD shows "O6E XX XX".
4) Ensure that camera picks up image on 5100˚ K
color bar chart precisely and the illumination is
1500-2000 Lux.
5) Press the PLAY (Data Up)/STOP (Data Down)
so that the cyan vector is 280˚ .
6) Press the START/STOP (Confirm) button to
store data.
Samsung Electronics
CYAN VECTOR
280 DEG
7) The OSD shows "OK" after finishing the
adjustment.
13. B-Y POSITIVE HUE (indoor)
1) Camera mode & 3100˚ K color bar chart
2) Connect a video output terminal to a
vectorscope and a TV.
3) Press the FF(Mode Up)/REW(Mode Down)
button so that OSD shows "176 XX XX".
4) Ensure that camera picks up image on 3100˚ K
color bar chart precisely and the illumination is
1500-2000 Lux.
5) Press the PLAY (Data Up)/STOP (Data Down)
so that the blue vector is 345˚ .
6) Press the START/STOP (Confirm) button to
store data.
7) The OSD shows "OK" after finishing the
adjustment.
Alignment and Adjustment
BLUE VECTOR
345 DEG
4-23