Samsung SCD180 Service Manual page 18

4. Functions of each button on the Remote Control
Button
START/STOP (Confirm)
STOP (Data Down)
PLAY (Data Up)
FF (Mode Up)
REW (Mode Down)
In adjustment mode, the buttons of the remote control is as the followings.
Note: In service adjustment mode, button names are different from those in customer function control mode.
e.g.) "START/STOP" is the same as "Confirm".
5. How to set up the camera adjustment mode
STEP 1
1) Connect the power source
(battery/DC cable).
2) Open Housing from video
camera.
3) Set the "POWER(CAMERA/PLAY-
ER)" switch to "CAMERA" position.
4) The OSD appears.
Note : "XX" indicates variable values.
Samsung Electronics
Stores changed value in the adjustment and auto adjustment mode.
Changes data in the adjustment state.
Changes mode.
Description
STEP 2
Press and hold the "DISPLAY" button
on the remote control and "EDIT(+)"
button on the video camera at the
same time for more than 5 seconds.
STEP 3
Monitor OSD shows "
Then camera adjustment mode has
been activated successfully.
Alignment and Adjustment
CAMERA ADJ O C D
".
EPR : F F EVR : F F
4-5