Homelink Default Code Mode - Lincoln Town Car 2004 Owner's Manual

Driver Controls

HomeLink default code mode

HomeLink uses default codes for testing and for optional home lighting
accessories. To load the default codes:
1. Simultaneously press and hold
buttons 1 and 3. CLEARING
CHANNELS is displayed.
2. After 20 seconds CHANNELS
CLEARED is displayed. Continue to
hold the buttons.
3. After 10 more seconds,
CHANNELS DEFAULTED is
displayed when all the channel
default codes have been successfully
loaded.
Note: If you need to train the
garage door opener, refer to "Train
mode" in this section.
110
REVIEW COPY
2004 Town Car (tow), Owners Guide (post-2002-fmt) (own2002),
Market: USA_English (fus)