Advertisement
1999 Escort/Tracer Workshop Manual
23. Remove the reverse idler gear.
1. Remove the reverse idler shaft.
2. Remove the reverse idler gear.
24. Remove the shift gate bolt.
25. Remove the shift control rod and gate.
1. Remove the shift control rod.
2. Remove the shift gate.
26. Remove the shift control shaft roll pin.
27. Remove the shift control shaft and shift fork selector lever.
1. Remove the shift control rod.
2. Remove the shift fork selector lever.
28. Shift into second and fourth gears.
29.
WARNING: When removing the shift fork and shaft assembly the detent ball will fly out. Hold a shop towel over the detent ball and spring to prevent the ball
from becoming airborne.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSXF/~MUS~LEN/19/...
Page 6 of 10
10/6/2009
Advertisement
