Omron 3G3RX-V1 Series Connection Manual page 26

3
Select Create from the Options
Menu of the PLC IO Table
Window.
The dialog box on the right is
displayed. Click the Yes Button.
The dialog box on the right is
displayed. Click the Yes Button.
4
The Transfer from PLC Dialog
Box is displayed. Select the I/O
Table Check Box and SIO Unit
Parameters Check Box, and
click the Transfer Button.
When the transfer is completed,
Transfer Results Dialog Box is
displayed.
Confirm that transfer was
normally executed by referring to
the message in the dialog box.
When the I/O table is normally
transferred, the dialog box
shows the following:
Transfer Success: 1 Unit
Transfer Unsuccessful: 0 Unit
Click the OK Button.
6．Connection Procedure
23