• High SPL without audible port noise • 13-ply, marine-grade, Baltic birch PRODUCT INFORMATION enclosure • 16 stainless steel hang points Each Panaray LT MB24-III bass loudspeaker • Contoured, powder-coated, stainless steel uses two 12” low-frequency drivers built grille into a proprietary acoustic enclosure.
Active equalisation for the LT MB24-III loudspeaker can be provided by using the Panaray LT MB24-III EQ card or the Panaray system digital controller. A parametric equaliser using a high-pass and low-pass filter can replicate the active equalisation curve below.
Page 4
ON-AXIS RESPONSE – IMPEDANCE VS. FREQUENCY DRIVER COMPLEMENT DIMENSIONS FINISH Two 12” low-frequency drivers built into a 648 mm x 508 mm x 714 mm Each loudspeaker is manufactured with proprietary acoustic enclosure. (25.5”D x 20”W x 28.1”H) a textured black polyurethane finish and contoured, powder- coated, stainless steel CONSTRUCTION FEATURES WEIGHT...
WARRANTY 3. Maximum SPL All versions of this product shall bear the CE The Bose Panaray LT MB24-III mid/high- Full bandwidth pink noise is applied to the mark, unless restricted to North American or frequency loudspeaker is covered by a 5- loudspeaker with its active equalisation Japanese markets.
Need help?
Do you have a question about the Panaray LT MB24-III and is the answer not in the manual?
Questions and answers