Nikon D7000 Experience User Manual page 8

Nikon D7000 Experience
memory card. It is best not to use this feature so that you don't lose track of any of your
images.
Display Mode
This is used to select what information is available to be shown along with your images
during playback. I recommend that you select all of these options. Focus Point will
show you which focus point was active and will thus verify if you properly focused where
you intended (unless you recomposed after locking focus). Highlights will show if you
have overexposed the highlights (something you typically want to avoid) by having
those areas of the image blink during playback. RGB Histogram will also help show if
an image's exposure is correct, or if you have overexposed or underexposed it, through
the use of a graph. Data will display detailed data of the camera settings used for each
image. This guide will go into more detail about all of these items later in the Exposure
and Histograms chapters, and why they are important to review for determining that
you obtained the proper or desired exposure of an image.
Copy Image(s)
This is used to copy images from one memory card to another when two cards are
inserted in the camera. This can be used to back up specific images or the entire card
at once. This could be used to create back-up copies of your images when you don't
have access to your computer, external hard drive, or CD/DVD burner, but it is best to
back them up on one of these more permanent devices as soon as possible.
Image Review
Use this to set whether or not your images are immediately displayed on the rear LCD
Monitor. If you typically review each image after taking it, turn this On. However, if you
don't review every image, turn it Off to save the battery, then hit the Playback Button
when you wish to review an image on the LCD Monitor. You will adjust how long the
images are displayed during review in Custom Setting c4 below.
After Delete
This selects which image is shown on the LCD Monitor after an image is deleted - the
next image (Show next), the previous image (Show previous), or the most intuitive
option which is to set it on Continue as before, which will show the next or previous
image depending on which order you were just reviewing them.
Rotate Tall
This will automatically rotate your images to the proper orientation in the camera's rear
LCD Monitor during playback. Turn this On and use in conjunction with Auto Image
Rotation (in the Setup Menu below) to view all images in the same orientation during
playback. If you like seeing your vertically composed images larger but "sideways" on
your rear LCD, set this to Off.
10