Fujitsu fa-19w1s-h2a User Manual page 9

Operation
Audio Menu (If there is
no speaker installed,
please skip this item.)
Notes
Your LCD monitor has been adjusted to its optimal settings before shipment. You can also
adjust the image using the following illustrations and steps.
Press the "Menu"
Press the ▲
Press the
Press the
To go back to the previous menu, press the
automatically.
To exit the OSD menu press "Menu"
-Position
50
Image Menu
Color Temp. Menu
Misc. Menu
Info. Menu
The OSD turns off several seconds after you stop pressing the buttons while
performing an adjustment.
Any changes are automatically saved in memory when the OSD turns off. Turning off
the power should be avoided while using the menu.
Adjustments for clock, phase and positions are saved for each individual signal
timing. Except for these adjustments, all other adjustments have only one setting,
which applies to all signal timings.
To select function, click the blue cursor on the desired option.
button to display the OSD.
or ▼ button to select the function to be adjusted.
button to access the function to be adjusted.
or buttons to change the current setting of the function.
8
.
button Changes are saved
again.