Table of Contents
Advertisement
Main Menu
If the driver's
AUTO REVERSE
window runs into any obstacle while
it is closing automatically, it will
reverse direction and then stop. To
close the window, remove the
obstacle, then use the window switch
again.
Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
before closing it.
Table of Contents
If your vehicle's battery is
disconnected or goes dead, or the
driver's window fuse is removed, the
AUTO function will be disabled. The
power window system needs to be
reset after reconnecting the battery
or installing the fuse.
1.
Start the engine. Push down and
hold the driver's window switch
until the window is fully open.
2.
Pull and hold the driver's window
switch to close the window
completely, then hold the switch
for a second or two more.
Power Windows
Instruments and Controls
79
Advertisement
Chapters
Table of Contents
