Table of Contents
Advertisement
Main Menu
Your dealer will reset this indicator
after completing the scheduled
maintenance. If this maintenance is
done by someone other than your
Acura dealer, reset the indicator as
follows.
1.
Turn off the engine.
Table of Contents
2.
Press and hold the select/reset
button in the instrument panel,
then turn the ignition switch to
ON (II).
3.
Hold the button for about 10
seconds until the indicator goes
off.
SELECT/RESET BUTTON
Instrument Panel Indicators
Security System Indicator
SECURITY SYSTEM INDICATOR
This indicator comes on when the
security system is set. See page
114
for more information on the
security system.
Instruments and Controls
55
Advertisement
Chapters
Table of Contents
