Rear Seats - Jeep Wrangler 2011 User Manual

Hide thumbs Also See for Wrangler 2011:
Table of Contents

Advertisement

GETTING STARTED
Driver's and Passenger Easy Entry Seats (Two-Door)
NOTE:
• If equipped with a combination lever, the seatback will return to its first locked position.
The recliner handle will have to be actuated to adjust the seatback to the desired
reclined position.
• The front passenger seats have a track memory which returns the seat to just past the
halfway point of the track, regardless of its original position.
• The recliner and easy entry levers should not be used during the automatic returning of
the seat to its fully upright position.
• Adjusting a seat while the vehicle is moving is dangerous. The sudden
movement of the seat could cause you to lose control. The seat belt might not
be properly adjusted, and you could be severely injured or killed. Only adjust a
seat while the vehicle is parked.
• Do not ride with the seatback reclined so that the seat belt is no longer resting
against your chest. In a collision, you could slide under the seat belt and be
severely injured or killed. Use the recliner only when the vehicle is parked.

REAR SEATS

Folding Rear Seat
• Be sure that the front seats are fully upright and positioned forward. This will allow
the rear seat to fold down easily.
To Fold The Rear Seat
• Lift the seatback release lever and fold the seatback forward (two-door models).
14
• Push the lever on the seatback
rearward (toward the rear of the vehicle)
to tilt the entire seat forward.
• To return the seat to a sitting position,
rotate the seatback upright until it locks.
Push the seat rearward until the track
locks.
WARNING!

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents