Advertisement
1965_Bell_Aud_PC5050_GSG_E_r14
Setting Up Your POP3 E-mail Account
You can set up a connection to an e-mail server so that you can send and
receive e-mail messages by using a modem or network connection and
Inbox on your device.
The ISP or network must use a POP3 or IMAP4 e-mail server and an SMTP
gateway.
You can use multiple e-mail services to receive your messages. For each
e-mail service you intend to use, first set up and name the e-mail service.
If you use the same service to connect to different mailboxes, set up and
name each mailbox connection.
t o s e t u p y o u r p o p
1. In Inbox on your device,
tap
'Accounts
'New Account
2. Enter your e-mail
address in the field, and
then tap 'Next'.
1/5
Next
will initiate auto-configuration – which attempts to connect your Pocket
PC Phone to your e-mail server and automatically download the necessary
e-mail connection settings. Tap 'Next' to continue.
10
3/19/04
3:00 PM
Page 10
3
s e r v i c e :
'
, and then
'
.
2/5
3. i) Enter
'Your
name' (ex. John Smith).
'
ii) Your
'User Name
should already be
configured. If not, please enter.
iii) Enter your 'Password'.
vi) Tap 'Next'.
v) From the drop down menu select the
"Account type" that your e-mail provider
supports (POP3 or IMAP4).
4. Enter a 'Name' for your e-mail account then
tap 'Next'.
5. If not already set-up, enter your
e-mail provider's server name information
for Incoming mail, Outgoing mail,and
Domain, then tap 'Finish'.
John Smith
3/5
4/5
5/5
11
Advertisement
