Advertisement
1965_Bell_Aud_PC5050_GSG_E_r14
c o n n e c t i o n t o y o u r c o m p u t e r
When the connection is made for the first time, install ActiveSync on to
your computer. Using Microsoft ActiveSync, you can synchronize
information between your computer and your PPC-5050. Synchronization
compares the data on your PPC-5050 with your computer and updates
both computers with the most recent information.
1. Insert Companion CD into CD-ROM drive of the computer.
The screen showing the startup of a setup program is displayed.
Note If a setup program does not start up even after insertion of the
CD-ROM, double click SETUP.EXE in the route directory contained on
the CD-ROM.
2. Click
'Start
Here'.
3. Install Outlook 2002. Click
'Install Outlook
instructions on the screen.
4. Install ActiveSync 3.7.
i. Click
'Install ActiveSync
screen.
ii. When installation is completed, a connection wizard appears.
5. When the Get Connected screen appears, connect the USB cradle to the
USB port of your computer.
6. Place the PPC-5050 to the USB cradle with the PPC-5050 power turned
off.
7.Proceed with the setting according to the instructions on the screen.
Note For more information on the connection to the PPC-5050 or other
settings, please see the Help option in ActiveSync.
6
3/19/04
2:59 PM
2002' and follow the
3.7' and follow the instructions on the
Page 6
setting up your device for wireless use
Your device should already be programmed by your Bell Mobility or Bell
World representative for use on the Bell Mobility network. You should have
the following information :
i. Mobile Number
ii. Voice mail password (4-digit number)
iii. Activation Lock code Number (6-digit number)
If you are missing any of the above information, please call Bell Mobility
Customer Service at 1-800-667-0123 prior to starting this process.
Setting up the
Make sure your wireless connection is enabled before you start (this will
allow you to use the phone and access data). To do so, you must ensure
that your connection reads
What is
Flight
Mode?
On all airplane flights, you are requested to turn off your wireless device.
When you are getting ready for take-off, you should enable
Therefore, when your PPC-5050 has
phone has been turned off. In this mode you will still be able to access
offline information including Calendar, Contacts, etc. and will also help
conserve battery power since the device is not being used for wireless
access.
When
Flight Mode
make calls and access data (i.e. Internet & E-mail). Your
should always be
device.
To turn
Flight Mode
and then tap 'Turn
Connection:
Flight Mode OFF.
Flight Mode
ON, it means that your
is OFF, your phone is turned on and you are able to
OFF
unless you need to completely shut down your
ON, which turns your phone off, tap the
ON Flight
Mode'.
Flight
Mode.
Flight Mode
icon
7
Advertisement
