Package Contents; System Requirements - D-Link DAP-1360 Quick Installation Manual

Open the DAP-1360 package and check to see if all of the following items are
included inside:
• DAP-1360 Wireless N Access Point
• Two detachable antennas
• Power adapter
• Cat. 5 Ethernet cable
• CD-ROM containing the User's Manual
and this Quick Installation Guide
If any of the above item is missing or damaged, contact the reseller from
whom you purchased this package immediately.

System Requirements

The DAP-1360 Wireless N Access Point is designed to work with computers
equipped with Windows
To configure this Wireless N Access Point, you need a computer with an Ethernet
interface and an Internet browser such as Microsoft Internet Explorer 6.0 or above,
Netscape Navigator 7.0 or above, or FireFox 1.5 or above.
Setting Up the DAP-1360
Step 1: Connect the Power Adapter.
Check the AC voltage of your AC power outlet against the AC power input of
the power adapter. Connect the power adapter supplied with the DAP-1360 to
the power socket on the back of this device first, then plug it to your AC power
outlet. Check to see that the Power LED on the front panel of the DAP-1360 is
turned ON.

Package Contents

, Macintosh
®
, or Linux-based operating systems.
®
2