Permutit 307-311 Timetronic User Manual page 23

CHECK THE SETTINGS
Pressing the SELECfbutton runs you through
the different stages of the programming.
Press Select once
Time will 'flash and show the present time.
Press Select again
Water hardness will flash and shows setting.
Press Select again
Recharge time is displayed and flashes.
Press Select again
Average daily Iitres used is displayed.
Press Select again
Returns to the operation mode.
READING THE CHARGE BAR DISPLAY
The charge bar is continually displayed and
shows at a glance the percentage of water
softening capacity remaining. Following a
recharge, the charge bar returns to the 100%
charge position.
This is auseful feature as it allows you to see
at a glance the status of your machine. If you
are about to have an influx of weekend guests
and want to ensure that you will not deplete
your water softening capacity then check the
unit status. If it is below 50% it may be wise
to initiate an immediate recharge or set the
machine to recharge that night.
CHARGE
~100%
",-, -1"
·50%
L'
=, - '-'
· ·
1
TO RECHARGE TONIGHT
D
The unit can be programmed to
recharge at the next pre-programmed
time, regardless of its remaining capacity.
This is particularly beneficial to ensure a
sufficient softened water supply for an
expected heavy water usage the next day.
Simply press the RECHARGE button once.
Recharge tonight will flash on the display.
CHARGE
• •
·100"
•
•
"0-1"
L' _, - L'
.50"
RECHARGE TONIGHT
==:
· •