Wireless System Features; Product Introduction - AMC iLive X2 User Manual

Product Introduction

The iLive X2 dual wireless microphone system is adopted by UHF frequency
transmission. This system is controlled by mini CPU control which enhances the frequency
more stable. The working range is 795MHz~820MHz where programmed 100 frequency
combinations make the channels interchangeable. Advanced audio and noise lock by dual
mute control technology avoids the interruption from any noise signal. The anticipated
decline function of CPU settles the weakness of interval break at the audio output from
working distance of receiver. In this dual wireless microphone are integrated Infrared
Automatic Channel Targeting system, locking function, High and Low modes power's
transmitter. The main body provides two separated balance outputs of each microphones
and one mixed unbalanced output. These outputs allow very conveniently connect this
microphone with mixers or amplifiers. In this handheld microphone is installed unique
software program which controls power-on and power-off. No matter in what situation the
whole system is, there is no shock from accidently power-on and power-off, and therefore the
safety of post amp and speakers is ensured.