Usb Configuration - Asus RS720-E6 User Manual

5.4.4 USB Configuration
Advanced

USB Configuration

Module Version - 2.24.3-13.4
USB Devices Enabled :
None
Legacy USB Support
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
Hotplug USB FDD Support
USB Mass Storage Device Configuration
The following item appears only when you set USB Function to [Enabled].
Legacy USB Support [Enabled]
Allows you to enable or disable support for legacy USB devices. Setting to [Auto]
allows the system to detect the presence of USB devices at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy
USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]
The following item appears only when you set USB Function to [Enabled].
USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller to HiSpeed (480Mbps) or FullSpeed
(12Mbps). Configuration options: [FullSpeed] [HiSpeed]
BIOS EHCI Hand-Off [Enabled]
Enables or disables the BIOS EHCI hand-off support.
Configuration options: [Disabled] [Enabled]
Hotplug USB FDD Support [Auto]
Allows you to configure the Hotplug USB FDD support.
Configuration options: [Disabled] [Enabled] [Auto]
USB Mass Storage Device Configuration
Advanced
USB Mass Storage Device Configuration
USB Mass Storage Reset Delay
Device #1
Emulation Type
Device #2
Emulation Type
ASUS RS720-E6/RS12
BIOS SETUP UTILITY
[Enabled]
[HiSpeed]
[Enabled]
[Auto]
BIOS SETUP UTILITY
[20 Sec]
JetFlash TS256MJF2A
[Auto]
USB Hotplug FDD
[Auto]
Enables support for
legacy USB. AUTO
option disables
legacy support if
no USB devices are
connected.
Allows BIOS to Enable
or Disable Floppy
Controller.
5-21