TANDBERG Profile Administrator's Manual page 41

Profile 42" with Codec C20
!40-%0-& :0-(4*,6-/40
Contents Introduction
The PrecisionHD 1080p camera
Video out. For video signals, connect from the video out on the
camera to the video in on the codec.
Power and camera control. For power in and camera control,
connect from the camera control & power on the camera to
the Camera port on the codec. When the camera is used with
TANDBERG codecs, power will be supplied through the Camera
Control cable. When used with non-TANDBERG Codecs, you may
have to connect power separately.
HDMI and HD–SDI
When connected to Codec C20:
• HDMI is the main video source, maximum resolution 1080p60
• HD–SDI is the secondary video source (not supported with
Codec C20)
Kensington lock
The Kensington lock may be used to prevent the camera to be
moved from its place or to prevent theft.
D14554.01—OCTOBER 2009
9%--/01'&-"(-%* =#4,-'-2%'3%0,&
Getting started About the menus
* Not supported with Codec C20
;2%'<%--/01&'3%0, ;2%'<%--/01&'$/#("()
The settings menu Settings Library
The orange LED illuminates while in a
call and flickers when there is an
incoming call.
The
green LED
is continuously
illuminated when power
is On, but it flickers when
receiving signals from
the remote control.
Power Supply
Camera Control
Extra camera*
Administrator Guide
425#12( !"3%("& =>>%0*/6%&
Cameras Appendices
The lens hood is detachable.
We recommend that you
mount it to prevent stray light
from disturbing your video
experience.
Just snap it on gently.
HDMI Video Out
HD-SDI*
!40-"6-',&
Contact us
Kensington lock
Not Used
41