I.D. AL AP303 Manual page 25

I.D. AL - AP303 - Professional MP3 audio player - Manual I.D. AL - AP303 - Professional MP3 audio player - Manual I.D. AL - AP303 - Professional MP3 audio player - Manual
I.D. AL - AP303 - Professional MP3 audio player - Manual I.D. AL - AP303 - Professional MP3 audio player - Manual
Internal relay Output
An I/O extension module must be present in the player
In the window, select the relay(s) you wish to activate.
Note : the module 3 extension card includes 4 separate output
relays. To activate only one relay, the decimal value must be
interpreted as a binary value.
All relays OFF : Output 00
Relay 1 : Output 01
Relay 2 : Output 02
Relay 3 : Output 04
Relay 4 : Output 08
All relays ON : Output 15
External relay output
An extension module must be present on the
RS232 serial port.
In the window, select the relay(s) you wish to
activate.
For a proportional command (gradation in 0-
10 V or DMX command for example), enter the
associated value between 000 and 255.
Program number
If 6 actions are not sufficient, several programs can be
linked up. In this case, just select a different program
number.
The 2 programs will run successively and 11 actions will
then be available. There is no limit to the number of
programs you can link up.
® Waves System
- 24 -
V 3.0 - 2004