Related Manuals for I.D. AL NanoPlayer
Summary of Contents for I.D. AL NanoPlayer
- Page 1 I.D. AL - NanoPlayer Lecteur MP3 et Wav autonome - Mode d'emploi NanoPlayer Audio Player MP3 & Wav MANUAL ® Waves System V 1.0 - 2008...
- Page 2 Information in this manual is subject to change without notice and do not represent any commitment from Waves System. The equipment described in this manual is supplied under condition of the terms of license specifying the legal use conditions. This manual can’t be reproduced or used, in whole or in part, in any form and by any mean, for other use than private, without the written permission from Waves System.
- Page 3 • The AP103 MicroPlayer complies with the applicable technical safety standards at the date of print. All rights reserved for electrical diagrams, procedures, mentioned names and equipments. • No reproduction, in whole or in part, without the written permission from Waves System. A.4 General safety instructions This equipment left our facilities in perfect conditions of operation.
- Page 4 Only the original packing guarantees optimal safety of the appliance during transport. Should it be necessary to ship the product during the guarantee period, Waves System will not accept claims for damage arising during the transport from using incorrect packing material! •...
- Page 5 I.D. AL - NanoPlayer Lecteur MP3 et Wav autonome - Mode d'emploi A.6 - Conditions of use : • This product has been designed for indoor use only. • If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately.
-
Page 6: Product Presentation
Amplifier output power is determined by the power supply. When the line level output is used a 500mA 6W unit is enough to power the NanoPlayer. If the integrated amplifier is used a 2A (24W) power supply unit minimum is required. If the supply unit has insufficient power, sound will be very bad and the power unit will heat up and eventually break down. - Page 7 «FAT». You can also use FAT32 format for SD card above 512Mo. Push the card without forcing. To remove, push on the card to release it. Caution, the NanoPlayer does not have any on-off switch. The player is powered on as soon as it is plugged in.
- Page 8 12V DC, even if the player can be powered between 10V and 15V. The current used will depend on the power of the amplifier. 5 - Infrared: The NanoPlayer can be controlled with a infrared remote handset (not supplied with the OEM board - available separately).
- Page 9 I.D. AL - NanoPlayer Lecteur MP3 et Wav autonome - Mode d'emploi ID-AL remote control handset 6 + 10 - Input on dry contact: Connect a push button, presence detector, smoke, heat, light or pressure sensor ... relay output, or any type of contact to trigger the player on happening of an event. Create a brief contact between «SW»...
- Page 10 1R0: Directory N° 1 - Trigger directory, played when the input contact is activated On switching on the NanoPlayer, presence of the Autoplay directory N°0 is checked ; if the directory is present, playback of the content automatically starts. If the autoplay directory is not present, the player goes into stand-by mode and awaits for activation of the input contact.
- Page 11 I.D. AL - NanoPlayer Lecteur MP3 et Wav autonome - Mode d'emploi For the default directory (read on powering on) «0xx»: xRx : R for random mode (RND) xSx : S for sort mode, i.e. playback in a defined order (SORT) - «R»...
-
Page 12: Infrared Remote Control
In random mode, they will all be read. 5 - Infrared remote control The NanoPlayer includes an infrared sensor on the front of the board and can therefore be operated with a IR remote control. An optional ID-AL infrared remote control handsed is available. - Page 13 I.D. AL - NanoPlayer Lecteur MP3 et Wav autonome - Mode d'emploi The ID-AL remote handset offers the following controls: Transport controls: Play / Stop / Next track / Previous track Volume controls: Increase / Decrease Trigger key: Launches the trigger directory (as an input contact) ®...
- Page 14 I.D. AL - NanoPlayer Lecteur MP3 et Wav autonome - Mode d'emploi Appendix A - Characteristics Power supply: • Nominal voltage: 12V DC • Power supply range: 10V to 15V DC Consumption on 12V power supply: • Stand-by: 60mA • Reading (line level output - amplified output not used): 95mA •...
- Page 15 I.D. AL - NanoPlayer Lecteur MP3 et Wav autonome - Mode d'emploi Note : ® Waves System V 1.0 - 2008...
- Page 16 I.D. AL - NanoPlayer Lecteur MP3 et Wav autonome - Mode d'emploi http://www.id-al.com http://www.wsystem.com ® Waves System V 1.0 - 2008...