Download  Print this page

NEC MP-01 Quick Reference Manual page 16

Hide thumbs

Advertisement

USB Memory Procedures
Copying Program Data to the MP-01 Media Player's Memory Card
Copying Program Data to the MP-01 Media Player's Memory Card
DVI cable
USB terminal
Prepare a USB memory device that has the program data loaded.
Caution: The provided Authoring software's "Distribution" function must be used to copy the program data to the USB memory.
Turn off the media player power by pressing the Standby button on the remote control and then insert the
USB memory device that holds the program data into the media player.
Caution: If an update operation is performed, the program data in the media player will be overwritten. That is, the old program data will
be lost.
Turn on the media player power by pressing the Power button on the remote control. A confirmation screen
for the update operation will appear on the screen. Press the SET button. The files on the USB memory
device will be copied to the memory card in the media player.
Caution: If an update operation is performed, the program data in the media player will be overwritten. That is, the old program data will
be lost.
After the copy has completed, the media player will restart automatically. When the initialization of the
media player itself has completed (this takes about 60 seconds), the update confirmation screen will be
displayed again. Cancel this update operation by pressing the EXIT button.
Remove the USB memory device from the media player.
Caution: The maximum memory capacity for program data is 1.8 GB (when the provided SD card (2 GB) is used). The size of the
content stored on the USB memory must not exceed this value when copying program data to the media player. The capacity of the
memory card inserted in the media player can be verified with the "Memory Card" item on the OSD screen.
When the data capacity is 1.8 GB, the time required for the program data update will be approximately 15 minutes at most.
14

Advertisement

Table of Contents
loading

  Also See for NEC MP-01

This manual is also suitable for:

Sb-l008ku