Download Print this page

Advertisement

Media Player
(SB-L008KU)
User's Manual
Ver.1.10
Introduction
•What is Media Player?
Media Player is a tool for showing programs created from the combination of graphics and sound contents on a display. Programs are created
using the attached authoring software and distributed via LAN or USB memory.
Computer
+
Authoring software
USB memory
•What is Authoring Software?
Layout setting
The desired layout can be set by combining movies, still images, and messages.
Scheduling function
This function displays the program at the designated time. You can set the daily program start and end time or the program start and end time for a
particular day.
Distribution function
Program data is distributed via USB memory or to a maximum of 20 Media Players via LAN.
Important Information
This equipment is a Class A Information Technology Equipment certified by the Voluntary Control Council for Interference by Information Tech-
nology Equipment (VCCI).
In a domestic environment this product may cause radio interference, in which case the user may be required to take corrective actions.
This equipment conforms to the VCCI standard when the enclosed signal cable is connected.
CAUTION
This device is certified as VCCI class A. When this equipment is attached to a Class B LCD display, the display' s VCCI mark will be changed from Class B to
Class A.
Refer to the "Safety Precautions, Maintenance & Recommended Use" of the LCD Monitor in the User's Manual for notes on handling.
LAN
USB memory
1
Display
Movie
Still image
Message
Still image

Advertisement

   Also See for NEC SB-L008KU

   Related Manuals for NEC SB-L008KU

   Summary of Contents for NEC SB-L008KU

  • Page 1: Media Player

    Media Player (SB-L008KU) User's Manual Ver.1.10 Introduction •What is Media Player? Media Player is a tool for showing programs created from the combination of graphics and sound contents on a display. Programs are created using the attached authoring software and distributed via LAN or USB memory.

  • Page 2: Declaration Of Conformity

    For USA FCC Information 1. Use the attached specified cables with SB-L008KU(L008KU) Media Player so as not to interfere with radio and television reception. (1) Please use a good quality shielded video signal cable. Use of other cables and adapters may cause interference with radio and television reception.

  • Page 3

    Installation WARNING: Do not insert foreign objects inside the cabinet during installation. Insert the enclosed SD Memory Card firmly into the Media Player’ s memory card connector with the label side facing up. Caution Confirm that the write-protect switch is not at LOCK position. Turn off the main power of the Unscrew the 2 screws (Screw- Display.

  • Page 4

    Contents • Memory card • Utility discs (Attached Software and User’s Manual) • USB extension cable • Component input conversion cable • Setup guide Terminal panel 1Slot interface 5DVI output connector (DVI-D) Connector to connect to the display. This is connected to the DVI input connector of the external display.

  • Page 5: Basic Operation

    Basic Operation To operate this device, use the remote control enclosed with the display. Selecting Media Player Press the “OPTION” button on the remote. Opening Media Player OSD menu When the input signal of the monitor is “OPTION”, press the “OPTION” button to turn on/off the Media Player OSD.

  • Page 6: Usb Memory

    Connection When using LAN, after finishing the “Connection/Setting” in this chapter, refer to the “LAN Connection/Setting” (page 14). Preparation In order to use the Media Player to display the program on the Display, the enclosed authoring software, a computer, and a USB memory (if the program is distributed using USB memory ) are required.

  • Page 7: Language Setting

    Connection and setting (continued) Setting the Media Player Turn on the main power supply of the display. Press the “POWER ON” button of the remote control to switch the display on. Press the “OPTION” button of the remote control to select “OPTION”...

  • Page 8: Power Off

    Power States and Operations •Power ON Press the “POWER ON” button of the remote control. Media Player and the display will turn on at the same time. Note The Media Player takes approximately 1 minute to start up after it is turned on. During the start up, a message stating that there is no signal may be displayed on the player.

  • Page 9

    How to create program data Preparing content First, prepare the content you want to display. Content files available for use with the authoring software are as follows: File format Extension Still image (JPEG, PNG, BMP) * .jpg, * .jpeg, * .png, * .bmp MPEG1, MPEG2 * .mpeg, * .mpg, * .m2p, * .m2v, * .vob Movie...

  • Page 10

    Copy the program data on the memory card of the Media Player Prepare USB memory containing program data. Press the “STANDBY” button of the remote control to switch off the power of the Media Player, and then set the USB memory containing the program into the USB cable extension. NOTE: If the USB cable extension is not used, set the USB memory directly into the USB memory connector on the main body of the Media Player.

  • Page 11

    Main Menu Sub Menu Description Date Set the current Date and Time. Time DATE/TIME NTP Server This is not used in this equipment. Time Zone This is not used in this equipment. Static IP/DHCP Select the IP Address setting method. Set the IP Address used when selecting a Static IP.

  • Page 12

    Slide Show Mode/Video Repeat Mode These functions continuously display still image data (*.jpg, *.jpeg, *.png, *.bmp) or movie files (WMV9, MPEG1, MPEG2) in the USB memory in the order of the file names. The still image data or movie data can be displayed without using authoring software. How to set the Slide Show Mode Set the USB memory containing the still image data you wish to display in the Media Player.

  • Page 13

    How to create program data using external video Program layout example External video image from the S TERMINAL input connector can be displayed with still images and messages. (For details refer to the authoring software UserÅfs Manual.) External video image Still image Message The following shows the connection with commercially available AV equipment.

  • Page 14

    <Using LAN> LAN Connection and setting Introduction When distributing program data via LAN, LAN connection and setting are required. There are two methods for setting the IP Address, one for Static IP Address and one using DHCP servers. In the case of Static IP Address, refer to “LAN connection/setting: When using Static IP Address,” and when using DHCP server refer to “LAN connection/setting: When using DHCP server.”...

  • Page 15

    <Using LAN> LAN Connection and setting (continued) •When connecting directly to a computer Computer Authoring software LAN connector Media Player LAN straight cable •When connecting with several computers via a hub Media Player LAN connector Computer LAN straight cable Authoring software LAN connector LAN straight cable Media Player...

  • Page 16

    <Using LAN> LAN Connection and setting: When using Static IP Address 1. Static IP Address setting of the Media Player 1) Switch on the power of the Media Player and Display. 2) Display the OSD screen using the menu buttons on the remote control, and open the “NETWORK.”...

  • Page 17

    <Using LAN> LAN Connection and setting: When using Static IP Address (continued) Panel setting wizard startup button of the 2. Authoring software panel registration authoring software Click the panel setting button in the “Panel Control” menu of the authoring software. 1 Distribution list setting If no changes are required, click “Next.”...

  • Page 18

    <Using LAN> LAN Connection and setting: When using the DHCP server 1. Set the Media Player to DHCP mode. DHCP setting DATE/TIME DHCP NETWORK 192 .168 .0 .3 PREVIEW Netmask: 255 .255 .255 .0 1) Switch on the power of the Media Player, Display, TIMER Gateway: 192 .168 .0 .1...

  • Page 19

    <Using LAN> LAN Connection and setting: When using DHCP server (continued1) Media Player name on the setting screen 6) After displaying the setting screen, confirm the Media Player name (player Name). To change the name, click the Change Player Name button, input the name using 15 or less one-byte characters starting with an alphabet, then click the “Submit”...

  • Page 20

    <Using LAN> LAN Connection and setting: When using a DHCP server (continued 2) 4. LAN connection test User name, password screen 1) Startup Internet Explorer on the computer, input the Media Player name set in the authoring software in the address column after the “http://.”...

  • Page 21

    Distribute program data to the Media Player 1. Use authoring software to create a program. Refer to the “SB-L008KU Quick Reference Guide” on the enclosed CD-ROM. 2. Switch on the power to the devices on the network such as Media Players, computers, hubs, and routers.

  • Page 22

    <Using LAN> About distributing the difference of the program data For programs that are redistributed via LAN in order to reduce time, only the newly added movies, still images, and audio files in the program are distributed. Program Type Distribution file Program to be newly distributed All files registered in the program Program to be re-distributed...

  • Page 23

    Troubleshooting (startup, video audio output, remote control, OSD) Problem Condition Causes and Remedies Reference page No power The power LED on the display is not on. See "Troubleshooting" in the display User's Manual — When no programs are scheduled, the device enters power save mode. When a programs starts, the power switches on automatically and the program is displayed.

  • Page 24: Troubleshooting

    Troubleshooting (program, content display) Symptoms Conditions Cause and measures Reference page The message “The codec in not supported” is displayed, nothing is displayed or Confirm that the codec of the movie file you are trying to display is supported by this displayed.

  • Page 25

    Troubleshooting (Using Ping command to conduct a LAN connection test) If the data cannot be distributed via LAN, use the Ping command on the computer to conduct a LAN connection test. In the case of a Static IP Address Command prompt screen 1 Look up the IP Address in “NETWORK”...

  • Page 26

    Maximum Play Time for movies In the case of the enclosed Memory card (2 Gbytes), it would be as follows. *The Play Time will differ depending on the SD Memory card capacity, and the VIDEO and AUDIO bit rate. Does not include still images and messages.

  • Page 27: Specifications

    Specifications SB-L008KU Media Player compatible displays P401, P461, M401, M406, P521, X431BT, P701 Media Player (SB-L008KU) Specifications Items Specifications 1920 x 1080 / 60 Hz (factory default settings) Internal image output Resolution 1360 x 768 / 60 Hz Internal Audio Output...

  • Page 28: Content Specifications

    Specifications (continued) Content Specifications (1) Movie file Video Maximum capacity Type Extension Detailed Specifications /Audio /Movie file •Codec Windows Media Video 9 (WMV3) •Bit rate Note 1) Normal resolution (Up to 720 x 480): maximum 20 Mbps Note 4) High-resolution (1920 x 1080 or 1280 x 720): maximum 35 Mbps •maximum resolution 1920 x 1080 25p (progressive) Video...

  • Page 29

    When you need to dispose of your NEC display products, please follow the guidance of your local authority, or ask the shop where you purchased the product, or if applicable, follow any agreements made between yourself and NEC.

  • Page 30

    Software license information This product contains open source software. For the use conditions of the open source software, refer to the following. Also, refer to the official website of each open source software. GNU Lesser General Public License (“GNU LGPL”): (“Software license information.pdf” p.3 - p.16) •DirectFB GNU General Public License version 2 (“GNU GPL v.2”): (“Software license information.pdf”...

Comments to this Manuals

Symbols: 0
Latest comments: