Assembly - White's MX5 Owner's Manual

Hide thumbs Also See for MX5:

Table of Contents

1. Remove all parts from the shipping carton and check assem-

bly diagram to ensure all parts are present.

2. Install black rubber washers on fiber clevis/lower rod, insert

clevis lower rod onto loop ears. Use only nonmetallic wash-

ers, fiber bolt, and fiber thumb nut to secure loop/search coil

to clevis/lower fiber rod.

3. Insert middle rod into curved "S" rod so that the spring clip

engages. Insert lower fiber rod and lock into one of the

adjustment holes in the middle rod. The second or third

adjustment holes are suitable for average sized adults. A

twist of the cam locks prevents wobble.

4. Wind the loop cable around the rod assembly, first revolu-

tion over the top of the rod, all the way to the top of the

curved "S" rod, about five revolutions. Use the black cable

retainers, one near the loop, and one near the top of the

curved "S" rod, to hold the loop cable in place. Plug the

MX5

Owner's Manual

Assembly

Page 4

Table of Contents