Wiring Diagram; Refer To Fig - Daikin FAQ71CVEB Installation Manual

CAUTION
• Refer to "2. Items to be checked at time of delivery to customer" on page 4 upon completion of the test oper-
ation and make sure that all the items are checked.
• If the customer's interior work is not finished on completion of the test operation, tell the customer not to
operate the air conditioner.
Substances generated from paints and adhesives used for the interior work may contaminate the product
if the unit is operated.
To test operation Contractors
When delivering the product to the customer after the test operation is completed, check that the control
box lid, the air filter and the suction grille are mounted. In addition, explain to the customer regarding the
state (ON/OFF) of the power supply breaker.

12. WIRING DIAGRAM

(Refer to Fig. 34)

1 TO OUTDOOR UNIT
3 (NOTE 4)
5 (NOTE 6)
7 INDOOR UNIT (SLAVE)
9 (NOTE 8)
11 INPUT FROM OUTSIDE
13 (NOTE 5)
15 (NOTE 7)
17 SIDE
English
2 (NOTE 10)
IN CASE OF SIMULTANEOUS
4
OPERATION SYSTEM
6 INDOOR UNIT (MASTER)
8 REMOTE CONTROLLER
WIRELESS REMOTE
CONTROLLER (RECEIVER/
10
DISPLAY UNIT) (OPTIONAL
ACCESSORY)
TRANSMISSION WIRING
12 CENTRAL REMOTE
CONTROLLER
WIRED REMOTE CONTROLLER
14
(OPTIONAL ACCESSORY)
16 FRONT
18 CONTROL BOX
27