Honeywell 7820 Solaris User Manual page 21

I
NSTALLATION
C I
ABLE NSTALLATION
11. Scan the following bar code to configure the auxiliary port on the 7820 to
accept a Honeywell scanner as the secondary scanner.
The following bar codes do not apply when using an MS6720 as a
secondary scanner. If the secondary scanner is not a Honeywell
scanner, refer to the Auxiliary Port Control section of the MetroSelect
Configuration Guide.
The auxiliary input port's data format must match the main output
format of the secondary scanner.
12. Scan the following bar codes, in order, to configure the secondary scanner
to match the auxiliary port's data format.
st
1
Enable AUX Output
³ 1 2 4 8 1 7
rd
3
Enable Comm Timeouts
³ 1 1 8 4 1 2
13. Turn on the host system.
(S
ECONDARY
Aux Port Defaults
³ 9 9 9 9 7 7
H S
ONEYWELL
)
CANNER
nd
2
Secondary Scanner Data
Format
³ 4 3 7 5 2 0
th
4
(Optional)
Turn OFF Secondary
Scanner's Beeper
³ 3 1 8 5 0 5
17