Table of Contents
Advertisement
Optional: LNBF Adjustment
Important Notice: Adjustments to the twin LNBF clamp
or the LNBFs rotation or placement can negatively affect
your installation. Please consider stopping the fine tuning
process at this time and lock down the dish elevation and
azimuth adjustments if the signal quality is 60% or better
on the weakest channel!
Slightly loosen the two Phillips head screws that secure the twin
LNBF clamp. Place the receiver on the weakest AMC4 channel and
slowly rotate LNBF #1 left or right. If no improvement in quality,
re-center the LNBF. Place the receiver on the weakest Galaxy25
channel and slowly rotate LNBF #2 left or right. If no improvement
in quality, re-center the LNBF.
to optimize the satellite quality readings. Place the receiver on the
weakest AMC4 channel and slowly slide LNBF #1 in toward the
reflector or out away from the reflector. If no improvement, return
the LNBF to the 25mm (3/4") forward offset position. Place the
receiver on the weakest Galaxy25 channel and slowly slide LNBF
#2 in or out. If no improvement, return the LNBF to the 20mm
(3/4") offset . Tighten the two Phillips head screws to secure the
twin LNBF clamp.
www.glorystar.tv
LNBF Rotation Adjustment
LNBF #1 or #2 can be slightly rotated
within the twin LNBF clamp +/- 5° to
optimize the satellite quality readings.
LNBF Position Adjustment
LNBF #1 or #2 can be slightly
positioned in the twin LNBF clamp
towards or away from the reflector
Toll Free 866-597-0728
27
Advertisement
Table of Contents
