Table of Contents
Advertisement
Dish Assembly
Once a suitable dish mounting location
has been chosen it is time to set up the
dish. Use the large cardboard shipping
box as a working surface to prevent
damage to the dish components during
assembly. We recommend assembling
the dish first and then installing on the
post mount.
Important Note:
An assembled dish will not be accepted for refund.
Dish Reflector Accuracy
Before assembling the dish it is extremely important to verify that
the reflector was not warped during shipping. Failure to check for
dish warpage could lead to many frustrating hours of trying to locate
the satellite.
Bad - Warped Reflector
Find a perfectly flat surface such as a garage cement floor and lay the
reflector face down. Are the edges of the reflector laying perfectly
flat? If any area of the edge is raised by even an 1/8th of an inch
reception of the satellite signal could be affected!
It is important to check the reflector for warping before
assembly of the satellite dish.
www.glorystar.tv
Good - Reflector
Toll Free 866-597-0728
13
Advertisement
Table of Contents
