22
Activate Preprogrammed Channels
This equipment must be activated for the
preprogrammed Glorystar Television and
Radio Services on satellites Galaxy25 and
AMC4.
Press the STB button on the remote to
1.
control the Set Top Box with the universal
remote control.
If required, press VOL/Right arrow to select an alternative
2.
language. Skip this step for default English language
selection.
3.
Press the MENU button to open the
Installation screen.
4.
Press CH/UP arrow one time to select
Factory Reset.
Press OK to open the Factory Reset screen.
5.
7.
When prompted with the on
screen message "Do you want to
load special data?", select YES then press OK.
8.
After 10 seconds the receiver will reset and display channel 1.
The receiver channel list is now activated and all menu settings are
automatically entered. Do not adjust any menu item! The receiver is
completely set-up and ready to install.
Do not press OK!
6.
Enter 2020 with the keypad.
©2008 Glorystar Satellite Systems