Locks and Security
Activating the memory feature
To activate this feature:
1. Position the seat and mirrors to the desired positions.
2. Press and hold either the 1 or 2
control on the driver's door for five
seconds. (A tone will be heard after
1
1
⁄
seconds when the memory store
2
is done) continue to hold until a
second tone is heard after five
seconds.
3. Within three seconds press the
Transmitter.
4. A tone will be heard when the activation is complete.
5. Repeat this procedure for another Integrated Keyhead Transmitter if
desired.
Deactivating the memory feature
To deactivate this feature:
1. Press and hold either the 1 or 2 control on the driver's door for five
seconds. (A tone will be heard after 1
is done) continue to hold until a second tone is heard after five seconds.
2. Within three seconds press the
Transmitter.
3. A tone will be heard when the deactivation is complete.
4. Repeat this procedure for another Integrated Keyhead Transmitter if
desired.
Replacing the battery
The Integrated Keyhead Transmitter uses one coin type three-volt
lithium battery CR2032 or equivalent.
112
control on the Integrated Keyhead
⁄
seconds when the memory store
1
2
control on the Integrated Keyhead