Chrysler 1500 Owner's Manual page 80

78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
WARNING!
Improper installation of a child restraint to the
LATCH anchorages can lead to failure of an infant or
child restraint. The child could be badly injured or
killed. Follow the manufacturer's directions exactly
when installing an infant or child restraint.
Installing The Child Restraint Using The Vehicle
Seat Belts
The seat belts in the passenger seating positions are
equipped with either an Automatic Locking Retractor
(ALR) or a cinching latch plate or both. Both types of seat
belts are designed to keep the lap portion of the seat belt
tight around the child restraint so that it is not necessary
to use a locking clip. The ALR will make a ratcheting
noise if you extract the entire belt from the retractor and
then allow the belt to retract into the retractor. For
additional information on ALR, refer to "Automatic
Locking Mode".
The chart below defines the seating positions with an
Automatic Locking Retractor (ALR) or a cinching latch
plate.
Driver
CRS Lock
First Row N/A
Second Row ALR
Third Row ALR
• N/A — Not Applicable
• ALR — Automatic Locking Retractor
For Regular Cab Only
Driver
First Row N/A
Second Row N/A
• N/A — Not Applicable
• ALR — Automatic Locking Retractor
Center Passenger
CRS Lock CRS Lock
N/A ALR
Cinch ALR
N/A ALR
Center Passenger
ALR ALR
N/A N/A