Chrysler 1500 Owner's Manual page 31

NOTE: To avoid unintentional shut downs, the system
will disable the one time press of the REMOTE START
button for two seconds after receiving a valid Remote
Start request.
To Exit Remote Start Mode And Drive The Vehicle
Before the end of the 15-minute cycle, press and release
the UNLOCK button on the RKE transmitter to unlock
the doors and disarm the Vehicle Security Alarm System
(if equipped). Insert the Key Fob into the ignition switch
and turn the switch to the ON/RUN position.
NOTE:
• The ignition switch must be in the ON/RUN position
in order to drive the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29
• For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), the message "Insert Key/
Turn To On" will flash in the EVIC until you insert the
Key Fob into the ignition switch. Once inserted, the
message "Turn To On" will flash in the EVIC until you
turn the ignition switch to the ON/RUN position.
• "Remote Start Active — Key To Run" will display in
the EVIC until you insert and turn the key to ON/
RUN position. Refer to "Electronic Vehicle Information
Center (EVIC)" for further information.
Remote Start Comfort Systems — If Equipped
When remote start is activated, the heated steering
wheel, and driver heated seat features will automatically
turn on in cold weather. In warm weather, the driver
vented seat feature will automatically turn on when the
remote start is activated. These features will stay on
through the duration of remote start or until the ignition
switch is turned to the ON/RUN position.
2