Chrysler 1500 Owner's Manual page 290

288 UNDERSTANDING YOUR INSTRUMENT PANEL
Forward Collision Warning (FCW) Sensitivity — If
Equipped
The Forward Collision Warning (FCW) feature can be set
to Far, set to Near or turned Off. The default status of
FCW is the Far setting. This means the system will warn
you of a possible collision with the vehicle in front of you
when you are farther away. This gives you the most
reaction time. To change the setting for more dynamic
driving select the Near setting. This warns you of a
possible collision with the vehicle in front of you when
you are much closer. This allows for a more dynamic
driving experience. To change FCW status press and
release the SELECT button until a check-mark appears
next to the feature showing the system has been activated
or the check-mark is removed showing the system has
been deactivated.
For further information, refer to "Adaptive Cruise Con-
trol (ACC)" in "Understanding The Features Of Your
Vehicle."
Trailer Brake Type
When this feature is selected, the Trailer Brake Type can
be changed between "Light Electric" and "Heavy Elec-
tric". To make your selection, scroll up or down until the
preferred setting is highlighted, then press and release
the SELECT button until a check-mark appears next to
the setting, showing that the setting has been selected.
Refer to "Integrated Trailer Brake Module" in "Starting
And Operating."
Calibrate Compass
Refer to "Compass Display" for more information.
Compass Variance
Refer to "Compass Display" for more information.