Wiper/Washer Lever; Manual Transmission 1 To 4 Skip Shift - Dodge Viper SRT-10 User Manual

2010 coupe, roadster, acr
Hide thumbs Also See for Viper SRT-10:
Table of Contents

Advertisement

OPERATING YOUR VEHICLE

WIPER/WASHER LEVER

Front Wipers
Delay, Low And High Operation
• Push the windshield wiper/washer control lever upward to the first detent for one of
seven delay settings. Rotate the end of the lever to select the desired delay interval.
• Push the lever upward to the second detent for low wiper operation and the third
detent for high wiper operation.
Mist
• Pull down on the lever and release when a single wipe is desired.
Washer Operation
• Pull the lever toward you and hold for as long as spray is desired.

MANUAL TRANSMISSION 1 TO 4 SKIP SHIFT

• Skip Shift is enabled when vehicle speed is between 12 MPH (19 km/h) and 23 MPH
(37 km/h), and the transmission is in FIRST gear, and the accelerator pedal is at 1/4
throttle or less.
• For optimal fuel economy, under low acceleration conditions, your vehicle will only
allow you to shift from first gear to fourth gear. Additionally, the Skip Shift Indicator
Light, located in the tachometer, will turn amber during these times.
• Refer to your Owner's Manual on the DVD for further information.
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents