Metrologic Optimus PDA SP5700 Series Quick Start Manual page 13

Version 2.0
OptimusPDA SP5700 Series User Manual
programs are granted to use by its End User License Agreement (EULA).
The user shall not modify or merge any form of a licensed program with other programs, or use
it in a network without prior consent of Metrologic. No right to copy a licensed program in
whole or in part is granted except as permitted under copyright law.
Metrologic may terminate the contract in the event where a breach of contract has been made
by the user.
4. Precautions
1) Always use the supplied AC adaptor and use at the correct voltage.
2) Do not dismantle or modify the product arbitrarily. It may cause damage and void warranty.
3) Do not use this product in dusty or humid environments.
4) Keep the PDA away from magnetic fields or large loudspeakers during use. Data may
otherwise be erased from the PDAs memory or damage may be caused to the LCD.
5) Avoid eye contact with the laser beam while scanning. It is harmful for your eyes.
5. Tips for OptimusPDA trouble-free usage
1) The OptimusPDA is designed to operate between -20 ~ 50 . Protect your terminal from
℃ ℃
extreme temperatures. Do not leave it on the dashboard of a car on a hot day and keep it away
from heat sources. Malfunction or loss of stored data may otherwise occur.
2) The PDA is durably made to withstand the 1.5m drop test. Care should still be taken not to
drop the PDA or to exert excessive pressure on the LCD as the touch-sensitive screen of the
PDA is made of glass.
3) Although the OptimusPDA is water resistant, do not expose it to rain or moisture for an
extended period of time. Avoid using the terminal when it rains heavily and wipe any excess
water off the terminal with a soft cloth before using.
4) Do not scratch the screen. The stylus pen provided is intended for use on a touch screen and
should be used. Never use pens, pencils or any other sharp objects on the screen. Clean the
screen with a soft, wet cloth when it is covered by dust.
5) Electronic devices are susceptible to RF energy interference from other devices or sources.
Avoid using your industrial PDA in the proximity of other signal emitting appliances to ensure
correct functioning of your PDA.
6) It is recommended not to store or use your terminal in an environment that is extremely dusty,
damp or wet.
Copyright © 2007 29 March 2007
7
Metrologic, Inc.