Canon creative park Service Manual page 4

Drum set : Assembly Instructions
PAGE06
Tom-tom 13" x 10"
*Before attaching parts 6O and 6P, bend them into shape as shown in the diagram.
*Begin from the opposite side to the seam.
Upper part
*NB: Align the thick marker line
Lower part
Seam
Take note of the markings
*NB: There are 12 6Q parts altogether.
One of them, marked 6Q-1, has a
specific location for attaching.
*Do not apply glue to
PAGE04
Specified position
with the specified position
on the upper part, and insert
it through. Do not apply glue.
Lower part
Upper part
.
PAGE07
Tom-tom 12" x 9"
Align the marker lines on 7A
and 7B with the glue spots on
7C ~ 7H, and attach.
*Begin from the opposite
side to the seam.
Upper part
Seam
Lower part
Specified position
*NB: Align the thick
marker line with
the specified position
on the upper part, and
insert it through.
Do not apply glue.
Take note of
the markings
Upper part
*Be sure to align the thick black marker lines
on the top and bottom (circled here in blue)
when attaching.
*Align the reverse sides and attach.
Lower part
*Before attaching parts 7P and 7Q, bend them into shape as shown in the diagram.
Lower part
Upper part
*Do not apply glue to .
*NB:
There are 12 7R parts altogether.
One of them, marked 7R-1, has a
specific location for attaching.
*Take note of where
the thick marker line is.