Upper Part; Lower Part - Canon creative park Service Manual

Drum set : Assembly Instructions
PAGE04
Bass drum
*Roll up and attach.
Seam line
Inside Align the seam lines and Wrapping the piece around
insert the pieces inside a thin cylindrical object will
each other, and attach to result in a neater finish.
the specified position.
Face the seam line
inwards and insert the
*Attach the back.
piece to the position specified.
*Do not attach the
area marked with
the diagonal lines.
*Attach the parts circled in blue
around the tom holder pipes so
that the pipes are held up vertically.
PAGE03
*Roll up and attach.
Assemble both the left
and right parts so that
their seams face outwards.
*After attaching, swivel the
pieces around as shown,
so that the seams face inwards.
Tom holder pipe
PAGE05
Bass drum
PAGE06
*Be sure to align the thick black marker lines
on the top and bottom (circled here in blue)
Tom-tom 13" x 10"
when attaching.
Align the marker lines on 6A
and 6B with the glue spots on
6C ~ 6H, and attach.
*Align the reverse sides and attach.
*Take note of where
the thick marker line is.

Upper part

Lower part