Before Starting - Canon creative park Service Manual

Drum set : Assembly Instructions

Before starting.

Each page of the "Parts sheet" has a sheet number in the top left-hand corner (Sheet
No.1~No.22). Work in order of these sheet numbers. (The parts for assembly are on pages 2 ~ 22.)
There are 384 parts in total, and each part is numbered according to its page.
Also, the glue spots on each part are marked with the number of the part to attach to them.
The numbers ~ in the Assembly Instructions indicate the order to attach parts. Follow
this order when attaching.
When one part has multiple spots to attach, or glue spots for attaching other pieces, colors
( ) and numbers are used to show the precise location and method for attaching.
Check the diagrams in the "Assembly Instructions" carefully for each part as you work.
PAGE02
Bass drum
Handy Hint:
Wrapping the piece around a can or other
cylindrical object will result in a neater finish.
*Attach to the display stand later.
PAGE02
Back side
Front side
Upper part
*NB: Begin from the opposite side
to the seam.
Front side
Diagonal line
Seam
Back side
PAGE03
Align the marker lines on 3A
Bass drum
and 3B with the glue spots on
3C ~ 3H, and attach.
*Align the reverse sides and attach.
*Take note of where
the thick marker line is.
*NB: Align the thick marker line
with the upper part, and insert
it through to the front side.
Do not apply glue.
Upper part
Back side
Lower part
Front side
Upper part
Back side
Front side