Remote Control - Pioneer VSX-S510-k Operating Instructions Manual

1 1

Remote control

1
2
3
4
5
6
7
8
9
10
1
SLEEP
Press to change the amount of time before the receiver
switches into standby (30 min – 60 min – 90 min – Off). You
can check the remaining sleep time at any time by pressing
11
once.
SLEEP
12
2
STANDBY/ON
Switches the receiver between standby and on.
13
3
RECEIVER
Switches the remote to control the receiver (used to select the
white commands (SB
surround sound (page
14
4
Input function buttons
Use to select the input source to this receiver
5
Listening mode buttons
– Switches between Auto surround mode
AUTO/DIRECT
(page 36) and Stream Direct playback
15
ALC/STANDARD
decoding and to switch between the modes of 2 Pro
Logic II, 2 Pro Logic IIx and NEO:6, and the Auto level
control stereo mode
(VSX-S310 only) – Press for standard decoding and to
16
switch between the modes of 2Pro Logic II and NEO:6,
and the Auto level control stereo mode
– Switches between the various surround
ADV SURR
modes (page 37).
6
Receiver and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button (BD, DVD,
etc.).
17
Press first to access:
RECEIVER
18
– Use to access the Audio options
TOOLS
– Press to access the Home Menu
HOME MENU
(page 51).
– Confirm and exit the current menu screen.
RETURN
Press BD, or
DVD DVR/BDR
– Displays the disc 'top' menu of a Blu-ray
TOP MENU
Disc/DVD.
– Displays the HOME MENU screen.
HOME MENU
– Confirm and exit the current menu screen.
RETURN
CH, etc.)). Also use this button to set up
51) or Audio parameters (page 40).
(page 26).
(page 37).
(VSX-S510 only) – Press for standard
(page 36).
(page 36).
(page 40).
(VSX-S510 only) first to access:
9
Controls and displays
– Displays the TOOLS menu of Blu-ray Disc player.
MENU
Press TUNER first to access:
– Memorizes stations for recall
TOOLS
used to change the name (page 34).
– Switches between AM, FM ST (stereo) and FM
BAND
MONO radio bands (page 33).
Press first to access:
iPod/USB
– Switches between the iPod controls and the
iPod CTRL
receiver controls (page 29).
///,
7
ENTER
Use the arrow buttons when setting up your surround sound
system (page 51). Also used to control Blu-ray Disc/DVD
menus/options.
8
Component control buttons
The main buttons (, , etc.) are used to control a component
after you have selected it using the input function buttons.
• The BD, DVD, and CD operation using the component
control buttons are limited only to Pioneer components.
The controls above these buttons can be accessed after you
have selected the corresponding input function button (BD,
and CD). These buttons also function as described
DVD
below.
Press first to access:
TUNER
– Use to search for RDS program types
PTY
Europe)
– Switches between AM, FM ST (stereo) and FM
BAND
MONO radio bands (page 33).
– Use to find radio frequencies.
TUNE +/–
– Use to select preset radio stations.
PRESET +/–
(VSX-S510 only) – Press while a song is being
+Favorite
played back or stopped. The selected song is then
registered in the Favorites folder (page
9
Playback Setting Button
– Set repeat playback. Each press cycles through
REPEAT
repeat single track, repeat all, and repeat off settings.
– Set random playback. Each press switches
RANDOM
between random on and random off.
10
Other component controls
There are other buttons that can be accessed after
is pressed. (For example CH, etc.)
SB
4
(page 34), also
7
58
(page 35). (for
44).
RECEIVER