Analog Audio Cables; Digital Audio Cables; Video Cables (Vsx-S310 Only); About Video Outputs Connection - Pioneer VSX-S510-k Operating Instructions Manual

2 2

Analog audio cables

Use stereo RCA phono cables to connect analog audio
components. These cables are typically red and white, and
you should connect the red plugs to R (right) terminals and
white plugs to L (left) terminals.
White (Left)
Red (Right)

Digital audio cables

Commercially available coaxial digital audio cables or optical
cables should be used to connect digital components to this
receiver.
Optical cable
Coaxial digital
audio cable
Note
• When connecting optical cables, be careful when inserting
the plug not to damage the shutter protecting the optical
socket.
• When storing optical cable, coil loosely. The cable may be
damaged if bent around sharp corners.

Video cables (VSX-S310 only)

Standard RCA video cables
These cables are the most common type of video connection
and are used to connect to the composite video terminals. The
yellow plugs distinguish them from cables for audio.
Yellow
16
Connecting your equipment

About video outputs connection

This receiver is not loaded with a video converter. When you
use HDMI cables for connecting to the input device, the same
cables should be used for connecting to the TV.
The signals input from the analog (composite) video inputs of
this unit will not be output from the HDMI OUT terminal.
Playback component
IN
HDMI
OUT
HDMI
TV
Video signals can be output.
4
7
58