Specifications; Power Section; Control Section - Yamaha A-S2000 Owner's Manual

A-52000
Specifications
POWER SECTION CONTROL SECTION
• Minimum RMS Output Power
(S 0,20 Hz to 20 kHz, 0.02% THO) .. 90 W
+
90 W
(40,20 Hz to 20 kHz, 0.02% THO) 150 W
+
150 W
• Dynamic Power (IHF) (S/6/4/2 Q) 105/135/190/220 W
• Input Sensitivity/Input Impedance
CD, etc. .. 150 mV/47 kQ
MM .. 2.5 mV/47 kQ
MC 100 flV/50 Q
MAIN IN .. I V/47 kQ
• Maximum Output PO\\'er
(I kHz, 0.7% THO, 4 Q) [U.K. and Europe models only]
160 W
• Output Level/Output Impedance
REC OUT . 150 mV/1.5 kQ
PREOUT........................................................ I V/I.5kQ
............................................. 0.02%
• IEC Output Power [U.K. and Europe models only]
(I kHz, 0.02% THO, S/4 Q)................ .. 95/155 W
• Maximum Input Signal
CD, etc ,. .. 2.S V
PHONO MM (I kHz) 120 mV
PHONO MC (I kHz) ,.... .. 7 mV
.. 80 W
...... 0 W
.. .. ±9 dB
.. ...... 3.5 kHz
.. ........ 30mW
. -20 dB (approx.)
• Headphone Rated Output
I kHz, 32 Q , 0.2% THO ..
• Channel Separation
CD, etc. (5.
J
kQ Terminated, I kHz/10kHz) 74/54 dB
PHONO MM (Input shorted, I kHz/1 0 kHz, Vol.:-30 dB)
.................................................................................... 90/77 dB
PHONO MC (Input shorted, I kHz/IO kHz, Vol.:-30 dB)
..................................................................................... 66/77 dB
• Tone Control Characteristics
BASS
Boost/Cut (50 Hz) ",9 dB
Turnover Frequency.............................................. 350 Hz
TREBLE
Boost/Cut (20 kHz) ..
Turnover Frequency... .. ..
• Audio muting ..
GENERAL
• Power Supply
[U.S.A. and Canada models] AC 120 V, 60 Hz
[Asia model] AC 220/230-240 V, 50/60 Hz
[General model] .. AC 110/120/220/230-240 V, 50/60 Hz
[China model] .. AC 220 V, 50 Hz
[Korea model] AC 220 V, 60 Hz
[Australia model] , , AC 240 V, 50 Hz
[U.K. and Europe models] AC 230 V. 50 Hz
• Power consumption 350 W
• Idling power consumption
• OtT-state power consumption ..
*
Specifications are subject to change without notice.
• Dimensions (W x H x D) .. . .... 435 x 137 x 465 mm
(17-I/S" x 5-3/S" x IS-5/16")
• Weight 22.7 kg (50 Ibs.)
.......... +0/-3 dB
...... +0/-0.3 dB
. 160
..., 9S dB
..93 dB
.. ... S5 dB
. ±0.5 dB
....................... ±0.5 dB
.. 0.67 dB
• Maximum Useful Output Power (.IEITA)
(I kHz, 10% THO, S/4 Q)
[Asia, General, China and Korea models only] ....... 120/190 W
• Dynamic Headroom
SO ..
• Damping Factor
I kHz, SQ ..
• Frequency Response
CD, etc. (Flat Position, 5 Hz to 100 kHz)
CD, etc. (Flat Position, 20 Hz to 20 kHz)
• RIAA Equalization Deviation
PHONO MM (20 Hz to 20 kHz) ........
PHO 0 MC (20 Hz to 20 kHz)
• Total Harmonic Distortion
CD BAL to SP OUT
(20Hzt020 kHz, 90 W/SO) 0.01%
CD. etc. to SP OUT
(20 Hz to 20 kHz, 90 W/S Q) .. 0.015%
PHO
0
MM to REC
(20 Hz to 20 kHz, 2 V) . 0.005%
PHO
0
MC to REC
(20 Hz to 20 kHz, 2 V) .. 0.05%
• Intermodulation Distortion
CD, etc. to SP OUT
(Rated output/S Q) .......
• Signal to Noise Ratio (IHF-A Network)
CD, etc. ( 150 mV, Input shorted)
PHONO MM (5 mY, Input shorted) .
PHONO MC (500 flV, Input shorted) ..
• Residual Noise (II-IF-A Network) (CD, etc.) ........ .... 33
~IV
20
En