Xvr-I & Xvr-I Se - Flame Energy ULC-S627 Manual

5.7 XVR-I & XVR-I SE
Type of fuel
Test standard
Recommended surface : 500 to 1800 sq. ft.
Heating capacity* – BTU/hr., EPA test wood: 45,000
Heating capacity* – BTU/hr., seasoned cordwood : 70,000
Optimum efficiency: 77%
*Why is the BTU indicated on the EPA label smaller than the one advertised?
You will notice a difference between the BTU output as indicated on the unit's white EPA label affixed to the glass and
the BTU as advertised on our web site and/or product literature. The maximum BTU output we advertise for this unit is
what will be obtained with a full load of seasoned cordwood inserted inside the firebox. The EPA output, on the other
hand, is what has been obtained during emissions testing. The EPA test procedure requires that a special type of wood
be used and positioned inside the firebox in a manner that does not represent the way the firebox volume would normally
be utilized using seasoned cordwood. The EPA test load is typically much smaller. Hence, the BTU as per the EPA label
is reduced. The BTU output that should be considered by a normal user is the one we advertise for seasoned cordwood.
Shipping Weight
Firebox :
Volume :
Firebox Floor Area:
Door Opening Size
Maximum
log size
Flue Outlet
Wood
ULC S627 (CSA B366.2) and UL 1482 for residential.
374 lbs (170 kg)
2,3 cubic feet (0.065 m3)
21"W X 16,5"D X 11,25" H (533 mm x 419 mm x 286)
17½"W x 9"H (445mm x 229 mm)
20" (508 mm)
6 inch (152 mm) diameter (vertical)
49