Sony CDX-GT430U Operating Instructions Manual page 7

!1QI
SEEK +/- buttons
CDIUSB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about I second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
lDJ
~
(front panel release) button page 5
~
MODE button page 9
To select the radio band (FM/AM).
~
Receptor for the card remote
commander
1BI
RESET button (located behind the front
panel) page 4
[j]]
ZAP button page 9
To enter ZAPPINTM mode.
!1§]
BTM button page 9
To start the BTM function (press and hold).
IITI
Number buttons
CDIUSB:
CD/(%): ALBM -/+ (during MP3IWMN
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
00:
REP page 10,11
CD:
SHUF page 10, 11
®:DM+
Improves digitally compressed sound,
such as MP3.
To activate the DM+ function, set
"ON." To cancel, set "OFF."
@:PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Ij]]
DSPL (display)/SCRL (scroll) button
page 10, 11
To change display items (press); scroll the
display item (press and hold).
~
AUX input jack page 13
To connect a portable audio device.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
1m
"(~)/"(~)buttons
To control radio/CD/USB, the same as
(SEEK) -/+ on the unit.
Setup, sound setting, etc., can be operated by
..
...
f)J DSPl (display) button page
10, 11
To change display items.
~
VOL (volume) +/- button
To adjust volume.
fJ]
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
PJI
SEl (select) button
The same as the select button on the unit.
~
t
(+)/.. (-) buttons
To control CDIUSB, the same as CD/(%)
(ALBM -/+) on the unit.
Setup, sound setting, etc., can be operated by
t ...
~
SCRl (scroll) button
To scroll the display item.
fB
Number buttons
To receive stored stations (press); store
stations (press and hold).
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (
SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.