Other Functions; Changing The Sound Settings; Adjusting The Sound Characteristics; Customizing The Equalizer Curve -Eq3 - Sony CDX-GT430U Operating Instructions Manual

Adjusting setup items - SET
The volume level is adjustable in I dB steps,
from -10 dB to +10 dB.
Repeat steps 3 and 4 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
S Press ~ (BACK).
The setting is complete and the display
returns to normal play/reception mode.
Tip
Other equalizer types are also adjustable.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
1
Press the select button repeatedly
until the desired item appears.
2
Rotate the control dial to adjust the
selected item.
3
Press ~ (BACK).
The setting is complete and the display
returns to normal play/reception mode.
The following items can be set (follow the page
reference for details):
( I
n I l
L..
u
11'4
+
6d]
ill
4
12
-
EQ3
Selects an equalizer curve from 7 music types.
LOW*l, MID*l, HI*1 (page 12)
BAL (Balance)
Adjusts the sound balance between the left and
right speakers.
FAD (Fader)
Adjusts the relative level between the front and
rear speakers.
SUB (Subwoofer volume)*2
Adjusts the subwoofer volume.
("ATT" is the lowest setting.)
AUX (AUX level)*3
Adjusts the volume level for each connected
auxiliary equipment: "+18 dB" - "0 dB" - "-8
dB."
This setting negates the need to adjust the
volume level between sources.
*
I When EQ3 is activated.
*2 When the audio output is set to "SUB-OUT'
(page 12).
*3 When AUX source is activated.
Customizing the equalizer curve
-EQ3
"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press the select
button repeatedly to select "EQ3."
2
Rotate the control dial to select
"CUSTOM."
3
Press the select button repeatedly
until "LOW," "MID" or "HI" appears.
Rotate the control dial to adjust the
selected item.
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the control dial to select the
setting (example "ON" or "OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
CLOCK-ADJ (Clock Adjust) (page 4)
BEEP
Activates the beep sound: "ON," "OFF."
AUX-A*1 (AUX Audio)
Activates the AUX source display: "ON,"
"OFF' (page 13).
A.OFF
Shuts off automatically after a desired time
when the unit is turned off: "NO," "30S
(seconds)," "30M (minutes)," "60M (minutes)."
SUB/REAR*1
Switches the audio output: "SUB-OUT"
(subwoofer), "REAR-OUT' (power amplifier).
DEMO (Demonstration)
Activates the demonstration: "ON," "OFF."
DIM (Dimmer)
Changes the display brightness: "ON," "OFE"