Pioneer SD-533HD5 Training Manual page 54

Front panel
S - VIDEO
VIDEO
INPUT 4
INPUT jacks
There are 4 sets of inputs for VCR and DVD/LD players. Use
RCA-type pin plug cords (the same as those used in Hi-Fi
systems) for connections. When the audio source to be
connected is mono, connect the source to the L-(MONO) jack.
MONITOR OUTPUT jacks
These are used for connecting the monitor to a VCR for
recording, or for linking it to another monitor. These jacks output
the video and audio signals of the source currently selected
by the INPUT selector. Connect these output jacks to your VCR's
inputs. Connect the VCR's outputs to the monitor's VIDEO
inputs.
S-VIDEO INPUT jacks
• Inputs signals from a DVD/LD player that has an S-VIDEO
output jack.
• When the signal input from the S-VIDEO INPUT jack is output
from the MONITOR OUTPUT jack, the output signal will be
a composite of Y and C.
AUDIO
R L VIDEO S-VIDEO
L R
OUTPUT
( MONO )
COMPONENT VIDEO INPUT jack
Inputs three signals – Y, P
players and the like.
Input formats in which images can be received.
Format
DVD player, etc.
Digital tuner, etc.
RGB INPUT jack
Inputs five signals – R, G, B, H and V – output from digital
tuners and the like.
Input format in which images can be received.
Format
Digital tuner
NOTES:
• SPLIT screen, FREEZE screen and SEARCH screen functions cannot be
used when 1080i or 480p component signals are input.
• Signals from MONITOR OUTPUT jacks will not be output when
component signals or RGB signals are input.
• The RGB input jack is designed for use in connecting a digital tuner with
RGB signal output, and it should accordingly never be used for connecting
to a personal computer or other device.
Video movie/VCR
(C ) and P (C ) – output from DVD
B B R R
Horizontal Vertical
frequency frequency
480 i 15.734 kHz 60 Hz
1080 i 33.75 kHz 60 Hz
480 p 31.468 kHz 60 Hz
Horizontal Vertical
frequency frequency
1080 i 33.75 kHz 60 Hz
54.