Toshiba e-studio 350 Quick Start Manual page 47

Setup Flow
Set up the TCP/IP
Set up the IPX/SPX
Set up the NetWare
settings
Set up the SLP
Session
Set up the Printing
Service
Install the Client
Software
Configuring the Printer
Drivers
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
When you want to connect the NetWare file server over IPX/SPX, enable the
IPX/SPX protocol and select the frame type.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the IPX/SPX Protocol"
Configure the NetWare settings on this equipment.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the NetWare Settings"
When the NetWare file server is connected over TCP/IP, enable SLP using
TopAccess.
Reference: Network Administrator's Guide
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Network Settings"
"Setting up the SLP Session"
Enable the NetWare Printing Service using TopAccess.
Reference: Network Administrator's Guide
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Print Service Settings"
"Setting up the NetWare Print"
Install the printer driver from the Client1 CD-ROM.
Reference: Printing Guide
- Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing Client Software for Windows"
"Installing the Client Software for Novell Printing"
Configure the options and department code.
Reference: Printing Guide
- Chapter 3 "PRINTING"
- "Printing from Windows"
"Before Using the Printer Driver"
Description/Reference
5
45