About Setup - Toshiba e-studio 350 Quick Start Manual

2. ABOUT SETUP

Initial Device Setup
First of all, you must set up how this equipment is managed and works as copier, printer, scanner, and
facsimile. This equipment can be used with the default settings, but some must be configured for this
equipment works properly.
"3.INITIAL DEVICE SETUP"
Setup the Network Document Processing System
This equipment is the Network-Ready MFP that can be used immediately after you connect to your network.
However, it is recommended to read following sections to make sure you choose right environments and
efficient settings for each features on this equipment even if you connect the machine to the above
environments. Also some features require configuring the settings to suit your environments.
This equipment may provide advanced document processing system in your place, if you add little more
environments in your place.
The references below are described easy-setup flow to enable each advanced document processing
5
features:
Setup Flow for Printing Environments
"Setup Flow for Microsoft Windows Workstation"
"Setup Flow for Macintosh Workstation"
"Setup Flow for Unix Workstation"
"Setup Flow for FTP Printing"
"Setup Flow for E-mail Printing"
Setup Flow for Scanning Environments
"Setup Flow for Scan to File"
"Setup Flow for Scan to E-mail"
Setup Flow for Fax/Internet Fax Environments
"Setup Flow for Network-Fax"
"Setup Flow for Internet Fax"
"Setup Flow for Onramp Gateway"
"Setup Flow for Offramp Gateway"
Setup Flow for e-Filing Environments
"Setup Flow for e-Filing Web Utility"
"Setup Flow for TWAIN Driver and File Downloader"
Setup Flow for TopAccess, Web-based Network Management Utility
"8.SETUP FLOW FOR TopAccess"
34
5.SETUP FLOW
Page 35
Page 36
Page 46
Page 48
Page 49
Page 50
Page 52
Page 54
Page 55
Page 57
Page 59 (Optional Fax unit required)
Page 61 (Optional Fax unit required)
Page 63
Page 64
Page 65