TANDBERG 2000 MXP User Manual page 221

Administrator Settings
5.8.2.6 IP Services
NTP IP
This is the NTP time server address from which the system can get updated time information.
This is a requirement for proper operation if H.235 authentication is implemented.
The Network Time Protocol (NTP) is used to synchronize the time of the system to a reference
time server. The NTP IP setting holds the IP address to a time source where the system can get
the exact time. The time server will subsequently be queried every 24th hour for time updates.
The system will use the time to timestamp messages transmitted to Gatekeepers or Border
Controllers requiring H.235 authentication.
HTTPS Protocol
HTTPS can be enabled and disabled from the used interface. From more info no HTTPS, please
reefer to the IP Protocol sections.
207